Product Details
deep groove ball bearings
Los deep groove ball bearings used in a wide variety of applications.
They are structurally simple, non-removable and hardly require maintenance.
They are resistant and particularly suitable for high speeds of service.
In addition to radial loads, these bearings can withstand thrust loads, in both ways. Hence, all these features, make them one of the most popular bearings.
Tapered roller bearings
Los tapered roller bearings they are particularly suitable for supporting combined axial and radial loads. They are usually of removable design, that is to say that the inner ring, with group of rollers and cage, form a unit that can be mounted separately from the outer ring.
needle roller bearings
The main characteristic that defines the needle bearings is that they are formed by cylindrical rollers of a very small diameter with respect to their length. They are very suitable for applications where radial space is limited and have a high load capacity taking into account the size of their section..
polyamide bearings
Los polyamide bearings also called "pom glass” are manufactured with a polyamide cage and glass balls. They are especially indicated for food applications, medical laboratories, impression, Photography, etc…
bearings for electric motor
Los bearings for electric motor They are specially designed for applications where maximum silence and minimum vibrations are required.. They are made of a special type of high-quality steel in accordance with ISO and SAE standards. 52100.
bearings for electric motor
Los bearings for electric motor They are specially designed for applications where maximum silence and minimum vibrations are required.. They are made of a special type of high-quality steel in accordance with ISO and SAE standards. 52100.
stainless products
The general catalog includes the different families of products that can be supplied in stainless steel also specifying the type of AISI steel corresponding to each of them.
The complete range of stainless products consists of:
- stainless ball bearings
- Stainless nuts and washers
- Stainless bearing supports
- stainless ball joints
- stainless bushings
- stainless chain
- Stainless Conveyor Balls
- Hardened and ground stainless shafts
ball joints
Las kneecaps are orientable mechanical components that allow the transmission of static and dynamic forces together with oscillating alignment movements, rotatable and tilt in various directions. They are available in steel/steel contact surfaces and many other maintenance-free solutions.. Las joint heads They are formed by a body or housing in the shape of an eye in which a ball joint is permanently inserted.. They are available with left or right hand threads., interna (female) the male (externa).
supports
Las kneecaps are orientable mechanical components that allow the transmission of static and dynamic forces together with oscillating alignment movements, rotatable and tilt in various directions. They are available in steel/steel contact surfaces and many other maintenance-free solutions.. Las joint heads They are formed by a body or housing in the shape of an eye in which a ball joint is permanently inserted.. They are available with left or right hand threads., interna (female) the male (externa).
Types of materials:
cast steel, of aluminum, stamped steel sheet, completely stainless and polyamide or thermoplastic.
Types of supports depending on the design:
– Bridge support: UCP, HCP, UCFLP, UCPX, UCPA, ROCK
– Square support: UCF, HCF, UCFX
– Round support: UCFC, HCFC, UKF, UCC, HCC, UCCX
– Oval support: UCF, HCFL, UCFLX, SAFD, SBFD, OINTMENT, SBLF
– Tension support: UCT, HCT, UCTX, UKT, UKTX
– Hanging brackets: LEARN, UKECH
– Support with flange: UCFA, UKFA, UCFB, UKFB
– Spindle supports: I, BK, FK, FD, FQ
– Support brackets: FF, BF, EF,
– Linear supports
The complete bearing supports (housings with UC insert bearings, on, SB, HC, UK o RB) They are economic supports and easy maintenance.
plain bearings
The production of bushings autolubricados covers multiple typologies aligned with international standards. The product is distributed worldwide, mainly in Europe, United States and Japan
slewing rings
Las orientation crowns or slewing rings are necessary when inside a machine or an application, a structural part has to rotate with respect to another part, on a single axis, guaranteeing the link between said parties. The crown must support and transmit the operating loads of the structure to which it is attached and must guarantee the degree of precision required for the application in question., compliance with the operating parameters and the required life cycle.
Applications:
The most common applications are:
- excavators
- concrete pumps
- lift vehicles
- bridge cranes
- Construction and port cranes
- wind turbines
- radars
- Handlers and setters
- bottling carousels
- turntables.
free wheels
A free wheel It is an element conceptually similar to a bearing but its movement is only possible in one direction., is one way. When the direction is reversed, the inner ring and the outer ring oppose the movement blocking the system. The freewheels then function as a clutch, allowing the transmission of engine/braking torque between the axle and the housing..
special bearings
We are in a position to offer you a wide selection of bearings suitable for each application., with custom production.
- shower screen bearings, bathroom
- Bearings for hanging systems: dry cleaners, textile, feeding,
- Bearings for truck roofs
- roller shutters, windows, mosquiteras
- Bearings for exhibitors, showcases and mobile furniture
- bearings for doors: sliding, sectional, of elevators
- Wheels for copier machines, printers
chrome steel bearings, stainless steel, polyamide, with crystal balls, ceramics, hybrids
roller chain
The chain is produced according to the highest quality standards, to meet the needs of customers in any industry segment: food industry, steelworks, mechanics, transport… A wide range of standard chains available from stock.
highly varied applications, such as transmission, elevation, traction, agriculture, light and heavy transport...
Main features:
. controlled quality
. Certified breaking loads
. factory pre-stretched 30%
. Excellent wear resistance
. precision mounting
. closed rollers
. State-of-the-art heat and mechanical treatments
. Testing Report disponible
A COMPLETE RANGE IN STOCK
. ISO – DIN chain 8187
. Chain ASA DIN 8188
. Stainless Chain
. Other options, To consult
. plain chain
. double chain
. triple chain
. Unions and elbows
Transmission belts
Las transmission belts They base their operation on friction forces and are usually made of rubber or rubber..
drive belt It is a type of mechanical transmission based on the union of two or more wheels or pulleys., subject to rotational movement, by means of a tape or strap. Said tape hugs the wheels exerting friction force, supplying them with power from the drive wheel.
seals
Los roadblocks son technical joints for rotary axes. Manufactured in a wide variety of shapes and materials, according to the working conditions and must be carefully examined before deciding to use it to ensure long-lasting performance..
This catalog includes different proposals for choosing a standard seal for a generic application.
seals
Los roadblocks son technical joints for rotary axes. Manufactured in a wide variety of shapes and materials, according to the working conditions and must be carefully examined before deciding to use it to ensure long-lasting performance..
This catalog includes different proposals for choosing a standard seal for a generic application.
General characteristics:
The seals are manufactured following modern techniques and with extremely reliable materials to fully guarantee all the requirements in use..
The main elements of a seal subject to strict quality control are: metallic support, Elastomer spring and retaining lip.
- Metallic support; Normally steel sheets are used and on request stainless steel
- Muelle toroidal; Phosphated C72 steel (Standard), AISI302 stainless steel (for acid and water)
- elastomer; The following list comments on the physical and mechanical properties of the different components used in Standard production.
- retaining lip; is the element that ensures tightness by direct contact, radial force important, this must be kept at the lowest possible limits, to ensure moderate friction and minimize heat generated, in order to guarantee that it will preserve its properties for a long period of time.
NBR SEALS, VQM y FPM
NBR – Nitrile-based elastomer.
It is for general use due to its high resistance to mineral and vegetable oils., as to abrasion, to bending and swelling. It can also be indicated for inorganic compounds, alkaline and acid in concentration and not elevated temperature.
VMQ – Silicone based elastomer.
The physical-mechanical properties of this elastomer are inferior to those of other types (Breaking strength, laceration, elongation) but it presents a very low permanent deformation and a very low coefficient of friction that in some applications is extremely important. It presents a very good resistance to mineral oils but not to gasolines, acids and chlorinated hydrocarbons.
FPM – Fluoro-carbon based elastomer (Viton DuPont)
Good physical properties at high temperature (with peaks up to +250º C). It is the best of elastomers to resist, oils, fuels, solvents and chemical agents in general. Its use is not recommended in the presence of esters., ketones or amines. Its use is essential in applications where operating conditions cause other elastomers to age and degrade very quickly..
technical boards
Is about Sealing gaskets for hydraulic and pneumatic applications whose main function is to seal the cylinder rod or piston. They are U-shaped elastomeric pieces with different designs, geometry and materials. They can be supplied in special sizes and materials.
Mechanical seals
Los mechanical seals with sealing gaskets for rotary axes that work with fluids under pressure, such as: shakers, centrifugal pumps, reactors, etc.. and the closing effect is achieved by the perfect finish of the rubbing faces.
They consist of a fixed part that remains static and a rotating part that rotates jointly with the axis.. Said rotating part has one or several springs whose mission is to keep the two friction faces in close contact or in some cases (conical spring), transmit the movement of the shaft to the rotating part.
linear motion
The Division of linear movement is dedicated exclusively to the advice and marketing of components, units and systems for linear movements providing solutions for guidance systems, drive, performance and positioning.
combined bearings
The solution for linear displacements, vertical and horizontal machine tools and forklifts.
Advantages:
- Reduces design and assembly costs
- Can withstand high radial and axial loads
- Large profiles for high static and dynamic loads
- Better dispersion of forces in the profiles
- Economic assembly by welding
- Bearings can be easily changed
conveyor balls
The solution for linear displacements, vertical and horizontal machine tools and forklifts.
Advantages:
- Reduces design and assembly costs
- Can withstand high radial and axial loads
- Large profiles for high static and dynamic loads
- Better dispersion of forces in the profiles
- Economic assembly by welding
- Bearings can be easily changed
Parts of a roller chain:
- outer plate
- inner plate
- Barrette
- Bearing
- Roller
roller chain
A roller chain it's a transmission element of power. This is a particular variant of the general case of transmission chain .One of the typical arrangements consists of a power shaft with a power sprocket (solidarity with the tree), a receiving shaft with its corresponding sprocket and roller chain (closed in on itself) that joins the two mentioned wheels.
There are particular applications that take advantage of the tensile strength of roller chain to use a piece of chain to transmit forces between two parts of a mechanical assembly. (one driving part and the other receiving).
A specialized application of roller chains is that of his use in mechanical saws .
Reducer
The industrial reducer is composed of a set of gears that work together to decrease the input speed of a motor to a desired output speed.
Engines
industrial engines are a key piece of machinery used in various industrial applications, from the manufacture of products to the generation of electrical energy
ENGINE TYPES
- Engines electrical
- Engines single phase.
- Engines triphasic.
- Engines specials.
- bench grinders.
- bench grinders.
- Centrifugal pumps.
- special windings.
Pinion
the pinion is one of the wheels in a rack mechanism, or it is also the smallest wheel in a pair of toothed wheels. These mechanisms can be in a direct transmission by gear or indirectly through a transmission chain or a toothed transmission belt..
forwarding
The Angular Returns are gearboxes that allow angular transmission of power between shafts. There is a wide range of angular drop boxes: hollow shaft, with flange, multi-axis, of reinforced axles, of small size, stainless steel and Power Master.
fixing bushing
The fixing bushings are specially designed to facilitate the assembly of the tensioner sprockets.
pulleys
industrial pulleys Their main function is to help people with such physical tasks as lifting heavy objects or transporting them.. All existing pulleys have a wheel that is fixed on its contour.
rollers
Son modular pieces that are linked together to form a conveyor belt on which to load merchandise: either to accumulate it in a specific place or move it to the next point in the production line.
Conveyor bands
Conveyor belts are a fundamental piece in the transfer of materials and merchandise both in production plants and in a warehouse, helping to make transport efficient and fast., adapted to what companies and the market currently demand. Bands or conveyor belts really offer good stability, that allows transporting materials that due to their size or characteristics cannot be transported with roller conveyors. The belts can also act as processing points from which the items or products that are moved are operated on..
Conveyors
They are all those equipment that are intended to give mobility to the products to take them from one place to another and transport them when necessary.. To a large degree, this type of conveyors are used for the heaviest loads.
